List of Publications (Faculty Wise)

(From 2018-2020 as per Criterion 5)

Sr. No.

Authors

Title of Paper, Journal Name, Volume No/Issue No, Page Nos.

Date of Publication

DOI

Prof. Rakesh Sehgal

  1. 1.        

Sanjay Kumar, Rakesh Sehgal, M.F.Wani, Mukund Dutt  Sharma

 

Stabilization and Tribological Properties of Magnetorheological (MR) Fluids: A Review

Journal of Magnetism and Magnetic Materials, Elseiver, Available online 16 July 2021, 168295

 

2021

https://doi.org/10.1016/j.jmmm.2021.168295

 

  1. 2.        

Sanjiv Kumar, Rakesh Sehgal, and Sanpreet Singh

Vibration signature analysis of whirling shaft of varying diameters operated at varying speeds, IOP Conf. Series: Journal of Physics: Conf. Series 1240 (2019) 012155, pp. 1-6

August,  2019

 

 

DOI: 10.1088/1742-6596/1240/1/012155

  1. 3.        

Sanjiv Katoch,

Rakesh Sehgal,Vishal Singh, Munish Kumar Gupta, Mozammel Mia and Catalin Iulian Pruncu

Improvement of tribological behavior of H-13 steel by optimizing the cryogenic-treatment process using evolutionary algorithms, Tribology International, 140 (2019) 105895, pp. 1-13

August, 2019

 

  1. 4.        

Sanjiv Katoch,

Vishal Singh and Rakesh Sehgal

Mechanical Properties and Microstructure

Evaluation of Differently Cryogenically

Treated AISI-H11 Steel, International Journal of Steel Structures, Springer,

ISSN 1598-2351

 

Feb., 2019

DOI 10.1007/s13296-019-00216-4

 

 

 

  1. 5.        

Sanjiv Katoch,

Rakesh Sehgal and Vishal Singh

Wear behavior of differently cryogenically treated AISI H13 steel against cold work steel, Proc. IMechE Part E, Journal of Process Mechanical Engineering 0(0) 1-14

June 2018

DOI: 10.1177/0954408918781621

 

Prof. M.F.Wani

  1. 6.        

B Parvez,  MF Wani

Tribological behaviour of nano-zirconia reinforced iron-based self-lubricating composites for bearing applications, Tribology International, 159

2021

https://doi.org/10.1016/j.triboint.2021.106969

  1. 7.        

J Singh, MF Wani

Perpetual effect of laser surface texturing on tribological properties of Ti3SiC2/GNP composite-a fretting wear study, International Journal of Applied Ceramic Technology

2021

10.1111/ijac.13810

 

  1. 8.        

A  Kumar,  GD Thakre,  MF  Wani

Influence of load and speed on tribological performance of Cu nanofluids in EHL line contacts, Materials Today: Proceedings, 41, 969-975.

2021

https://doi.org/10.1016/j.matpr.2020.10.931

  1. 9.        

S Saleem , MF Wani

 

Effect of load on the behaviour of tribofilms formed at the interface of austenitic steel and ductile iron – a raman spectroscopic study, Advances in Materials and Processing Technologies,

 

 

2020

 

https://doi.org/10.1080/2374068X.2020.1860591

 

  1. 10.    

S Danish S, MF Wani.

 

Insights into the tribological behavior of IF-WS2 nanoparticle reinforced mild extreme pressure lubrication for coated chromium/bulk grey cast iron interface, I.Mech E Journal of Tribology,235(7), 1478

 

2020

 

  1. 11.    

J Singh, MF Wani.

 

Fretting wear of spark plasma sintered Ti3SiC2/GNP ceramic composite against Si3N4, Ceramics International, 47(4), 5648-5655

 

2020

https://doi.org/10.1016/j.ceramint.2020.10.150

 

  1. 12.    

A Raina, M Irfan Ul Haq , MJ Mir, O Gulzar, MF Wani.

 

Snergism of TiO2 and graphene as nano-additives in bio-based cutting fluid- an experimental investigation.

Tribology Transaction, 64(2), 350-366

 

2020

https://doi.org/10.1080/10402004.2020.1842953

 

  1. 13.    

S Banday, MF Wani.

 

Nanomechanical and nanotribological properties of self-lubricating Ti/MoS2 nanocoating at nanoscale level, International Journal of Surface Science and Engineering ,14(2), 89-104.

 

 

2020

https://doi.org/10.1504/IJSURFSE.2020.108201

 

  1. 14.    

A Charfi  A, AI Dhaou,  M Kharrat, Wani MF, M  Dammak.

 

Tribological properties of composites based on nano-sized silicon nitride ceramics.

Journal of Materials Education, 42 (1-2), 29-40

 

2020

https://doi.org/10.1007/978-3-030-52071-7_38

 

  1. 15.    

Qadri SIA, Harmain GA, Wani MF.

 

The effect of cutting speed and work piece hardness on turning performance of Ni based super alloy-718 using ceramic cutting inserts.

Engineering Research Express 2020, 2(2), 01-21.

 

2020

https://doi.org/10.1088/2631-8695/ab40f0

 

  1. 16.    

S Danish S, MF Wani.

 

Tribological behaviour of chrome-deposited SAE9254 grade steel top compression piston ring under lubrication starvation and mild extreme pressure lubrication, International Journal of Engine Research, 22(4), 1285-1300

 

 

2020

https://doi.org/10.1177/1468087419890995

 

  1. 17.    

Qadri SIA, Harmain GA, Wani MF.

 

Influence of tool tip temperature on crater wear of ceramic inserts during turning process of Inconel -718 at varying hardness,Tribology in Industry, 42(2), 310-326.

 

2020

10.24874/ti.776.10.19.05

 

  1. 18.    

Danish S, Wani M F.

 

Tribological behavior of chrome-deposited SAE9254 grade steel top compression piston ring under lubrication starvation and mild extreme pressure lubrication, International Journal of Engine Research,

22(4), 1285-1300

 

 

 

2020

https://doi.org/10.1177/1468087419890995

 

  1. 19.    

AS Kalyanwat, S Sarkar, M Biswas, R Haldar, S Bandyopadhya, MF Wani .

 

SPS MoSi2-reinforced Y-Alpha-SiAlON ceramics: mechanical and high temperature tribological properties, J of Australian ceramic society, 01-09

 

2019

 

  1. 20.    

Danish S, Harmain GA, Wani MF.

 

Evaluating scuffing failure in dry sliding conditions of monolayer chromium piston ring/bulk grey cast iron liner interface, Tribology Online, 15(1), 9-17.

 

2019

https://doi.org/10.2474/trol.15.9

 

  1. 21.    

Mushtaq S, Wani MF, Nadeem M, Najar K, Mursaleen M.

 

A study on friction and wear characteristics of Fe–Cu–Sn alloy with MoS2 as solid under dry conditions,

Academy Proceedings of Engineering Science, 12, 1-7.

 

2019

. https://doi.org/10.1007/s12046-019-1208-8

 

  1. 22.    

Khan MJ, Gandotra H, Saleem SS, Wani M F.

 

Correlating the effect of material hardness, counterface hardness and load on the friction and wear of virgin and glass filled polytetrafluoroethylene (PTFE) using Taguchi approach and statistical analysis,

Jurnal of Physics: Conference Series 2019, 1240, 1-9.

 

2019

https://doi.org/10.1088/1742-6596/1240/1/012106

 

  1. 23.    

Qadri SIA, Harmain G A, Wani M F.

 

A study on effect of tool tip temperature on wear of ceramic cutting tools. Journal of Physics: Conference Series 2019, 1240, 1-8.

 

2019

https://doi.org/10.1088/1742-6596/1240/1/012119

 

  1. 24.    

Qadri SIA, Harmain GA, Wani M F.

 

Assessment of machinability of super alloy inconel 718 using aluminium oxide and mixed oxide ceramic cutting tool, IOP Conference Series: Materials Science and Engineering 2019 ;561, 1-6.

 

 

2019

https://doi.org/10.1088/1757-899X/561/1/012057

 

  1. 25.    

Qurat-ul-Ain, Wani M F, Sehgal R.

 

Analyzing structural and tribological characteristics of different materials at micro- and nano-level using molecular dynamics simulations: An overview.

IOP Conference Series: Materials Science and Engineering 2019, 561, 1-8.

 

2019

https://doi.org/10.1088/1757-899X/561/1/012052

 

  1. 26.    

Ashraf U, Saleem SS, Wani MF, Khan MJ.

 

Effect of load on the tribo-performance of 23-8N valve steel against GGG-60 seat material.;

Materials Today: Proceedings 2019, 19(2):349-353.

 

2019

https://doi.org/10.1016/j.matpr.2019.07.611

 

  1. 27.    

Manzoor S, Wani M F, Saleem SS.

 

Effect of load on the friction and wear behaviour of silicon nitride and silicon nitride- titanium carbide ceramic composite. Materials Today: Proceedings 2019, 19(2), 474-477.

 

2019

https://doi.org/10.1016/j.matpr.2019.07.638

 

  1. 28.    

S Banday, MF Wani.

 

Nano scratch resistance and nanotribological performance of Ti/MoS2 coating on Al-Si alloy deposited by pulse laser deposition technique.

Trans. ASME, J. of Tribology, 141(2), 1-24.

 

 

 

2019

https://doi.org/10.1115/1.4041366

 

  1. 29.    

S Banday, MF Wani.

 

Nanomechanical and nanotribological characterization of multilayer self lubricating /MoS2/Si/MoS2 nanocoating on Al-Si substrate. Surface and Interface Analysis 2019, 1-12.

 

2019

https://doi.org/10.1002/sia.6631

 

  1. 30.    

D Kumar D, B Lal, MF Wani, JT Philip, B Kuriachen.

 

Dry sliding wear behaviour of Ti-6Al-4V pin against SS316L disc in vacuum condition at high temperature.

Tribology-Materials, Surfaces and Interfaces, 13(3), 182-189.

 

2019

https://doi.org/10.1080/17515831.2019.1637148

 

  1. 31.    

H Singh, M  Singh,  J Singh,  BS Bansod , T Singh, A Thakur , MF Wani, J Sharma.

 

Composition dependence study of thermally evaporated nanocrystalline ZnTe thin films.

Journal of Materials Science: Materials in Electronics

30, 3504–3510.

 

2019

https://doi.org/10.1007/s10854-018-00627-9

 

  1. 32.    

G Khajuria,  MF Wani,  S Mushtaq, R Sehgal

 

Optimization of the effect of indentation load and dwell time on micro hardness values using fuzzy logic predictive model. Jurnal of Physics: Conference Series

1240, 1-10.

 

2019

https://doi.org/10.1088/1742-6596/1240/1/012085

 

  1. 33.    

Khan MJ, Wani MF, Gupta R.

 

Friction and wear characterization of graphite/polytetrafluoroethylene composites against stainless steel: A comparative investigation under different environments. Jurnal of Physics: Conference Series, 1240, 1-8.

 

 

2019

https://doi.org/10.1088/1742-6596/1240/1/012107

 

  1. 34.    

B Parveez, MF Wani, S Banday, MJ  Mir, MF Ali, S Mushtaq. 

 

Tribological characterization of iron based ceramic reinforced self- lubricating material.

Journal of Physics: Conference Series 2019, 1240, 1-9

2019

https://doi.org/10.1088/1742-6596/1240/1/0121

 

  1. 35.    

MJ  Mir,  MF Wani , S Banday, B Parveez..

 

Influence of cutting fluid conditions on tool wear and surface roughness in hard turning AISI-D2 steel using mixed ceramic tools. Journal of Physics: Conference Series, 1240, 1-9.

 

2019

https://doi.org/10.1088/1742-6596/1240/1/012109

 

  1. 36.    

V Kumar, MF Wani, JK  Mannekote, SV Kailas .

 

Tribological properties of some fatty acids.

Journal of Physics: Conference Series, 1240, 1-9.

 

2019

https://doi.org/10.1088/1742-6596/1240/1/012133 

 

  1. 37.    

S Kumar, MF Wani, R Sehgal, S Mushtaq.

 

Friction and wear properties of Si3N4/TiC ceramic composite under nano lubrication. Journal of Physics: Conference Series, 1240, 1-9.

 

2019

https://doi.org/10.1088/1742-6596/1240/1/012134

 

  1. 38.    

MF Ali, MF Wani, S Banday, B Parveez, MJ Mir.

 

Tribological characterization of Cu-Ni metal matrix composites using MoS2 nano- lubricant.

Journal of Physics: Conference Series, 1240, 1-10.

 

2019

https://doi.org/10.1088/1742-6596/1240/1/012135

 

  1. 39.    

J Singh, MF Wani, S Banday, C Shekhar, G Singh.

 

Nano scratch and nanoindentation: an approach to understanding the tribological behaviour of MAX phase material Ti2AlC. IOP Conference Series: Materials Science and Engineering, 561, 1-6.

 

 

 

2019

https://doi.org/10.1088/1757-899X/561/1/012111

 

  1. 40.    

P Kumar P, MF Wani.

 

Effect of temperature on the friction and wear properties of graphene nano-platelets as lubricant additive on Al-25Si alloy. Materials Research Express

6(4), 1-33.

 

2019

https://doi.org/10.1088/2053-1591/aafb46

 

  1. 41.    

S Banday S, MF Wani, MJ Mir, B Parveez

 

Adhesion property of self-lubricating Si/MoS2 nanocoating at nano-scale level.

IOP Conference Series: Materials Science and Engineering, 561, 1-7.

 

 

2019

https://doi.org/10.1088/1757-899X/561/1/012082

 

  1. 42.    

Hussain O, Ahmad B, Saleem SS, Wani MF, Khan MJ.

 

Effect of counter-face material on the tribological characteristics of UHMW polyethylene under synovial fluid lubrication. Materials Today: Proceedings 2019

19(2) :260-263.

 

2019

https://doi.org/10.1016/j.matpr.2019.07.205

 

  1. 43.    

Qadri SIA, Harmain GA, Wani MF.

 

An experimental study on investigation of machining of nickel based super alloy 718.

Materials Today: Proceedings 2019, 19(2), 541-545.

 

2019

https://doi.org/10.1016/j.matpr.2019.07.730

 

  1. 44.    

Qadri SIA, Harmain G A, Wani MF.

 

The effect of cutting speed and work piece hardness on turning performance of nickel based super alloy-718 using ceramic cutting inserts.   Engineering Research Express 2019, 2, 1-29.

 

 

2019

https://doi.org/10.1088/2631-8695/ab40f0

 

  1. 45.    

Himanshu, Sarkar S, Halder R , Biswas M, Bandyopadhyay S, Wani MF.

 

SPS processed TiB2 reinforced y-α-sialon composites: high temperature tribomechanical properties.

Polish Society of Composite Materials, 3, 95-99.

 

2019

 

  1. 46.    

MJ Khan MJ, MF Wani, R Gupta.

 

Tribological performance evaluation of PTFE composites under dry sliding and aqueous environments using taguchi approach and grey relational analysis: effect of material, test environment and load. Polymer Composites, 40(7), 263-287.

 

2018

https://doi.org/10.1002/pc.25113

 

  1. 47.    

S Mushtaq S, MF Wani.

 

High-temperature friction and wear studies of Fe-Cu-Sn alloy containing graphite as solid lubricant under dry sliding conditions. Material Research Express, 5(2), 1-23.

 

2018

https://doi.org/10.1088/2053-1591/aaa9a5

 

  1. 48.    

S Mushtaq S, MF Wani.

 

Tribological characterization of Fe-Cu-Sn alloy with graphite as solid lubricant. Industrial lubrication and tribology ,70(2), 393-400.

 

 

2018

https://doi.org/10.1108/ilt-11-2017-0337 

 

  1. 49.    

J Mir J, MF Wani

 

Influence of cutting fluid and machining speed on cutting performance and wear mechanism of coated carbide tool. Jurnal of Tribologi, 18, 58-80.

 

 

2018

 

  1. 50.    

MJ Khan MJ, MF Wani, R Gupta.

 

Tribological properties of bronze filled PTFE under dry sliding conditions and aqueous environments distilled water and sea water. International Journal of Surface Science and Engineering, 12(5), 348-364.

 

2018

https://doi.org/10.1504/IJSURFSE.2018.096742

 

  1. 51.    

MJ Khan MJ, MF Wani, R Gupta.

 

Tribological properties of glass fiber filled polytetrafluoroethylene sliding against stainless steel under dry and aqueous environments: enhanced tribological performance in sea.  International Journal of Materials Research Express, 5(5), 1-22.

 

2018

https://doi.org/10.1088/2053-1591/aac46c

 

  1. 52.    

D Kumar, KB Deepak, SM Muzakkir, MF Wani, P K.

Enhancing tribological performance of Ti-6Al-4V by sliding process. J. of Tribology - Materials, Surfaces & Interfaces, 12(3), 137-143

 

2018

https://doi.org/10.1080/17515831.2018.1482676

 

  1. 53.    

P Kumar, MF Wani.

 

Tribological characterization of hypereutectic Al-25Si alloy under dry and lubricated sliding conditions.

Trans. ASME, J. of Tribology, 140(1), 1-54.

 

2018

https://doi.org/10.1115/1.4036918

 

  1. 54.    

P Kumar, MF Wani.

Tribological characterization of graphene oxide as lubricant additive on hypereutectic Al-25Si/Steel tribopair. Tribology Transaction 2018, 61(2), 335-346.

2018

http://dx.doi.org/10.1080/10402004.2017.1322735

 

  1. 55.    

HK Pant, D Debnath, S Chakraborty, MF Wani, PK Das.

 

Mechanical and tribological properties of spark plasma sintered SiC/TiB2 and SiC/TiB2/TaC composites: effects of sintering temperatures (2000°C & 2100°C). Trans. Of ASME, J. of Tribology, 140(1), 1-10.

 

2018

http://dx.doi.org/10.1115/1.4037068

 

  1. 56.    

MJ Mir MJ, MF Wani.

 

Modelling and analysis of tool wear and surface roughness in hard turning of AISI D2 steel using response surface methodology. International Journal of Industrial Engineering Computations, 9(1), 63-74.

 

2018

http://dx.doi.org/10.5267/j.ijiec.2017.4.004

 

  1. 57.    

RA Khan, A Anand, MF Wani.

 

A holistic framework for environment conscious based product risk modeling and assessment using multi criteria decision making. Journal of cleaner production, 174, 954-965.

 

 

2018

https://doi.org/10.1016/j.jclepro.2017.11.005

 

  1. 58.    

D Khabale, MF Wani.

 

Fretting wear characterization of AZ91 and AE42 magnesium alloys under dry sliding conditions.

Trans. of ASME, J. of Tribology, 140(1), 1-55.

 

2018

https://doi.org/10.1115/1.4036922

 

  1. 59.    

Saleem S, Wani MF.

 

Effect of load on the retention of tribofilms at the contact interface under dry sliding conditions at 500ºC. Journal of Material Science and Engineering Technology, 49(2), 169-184.

 

 

2018

https://doi.org/10.1002/mawe.201700108

 

  1. 60.    

Mir MJ, Wani MF.

 

Hard turning of high-carbon high chromium tool steel using CBN tools under different lubricating/cooling conditions. Journal of Science and Technology B- Theoretical Sciences, 6(2), 108 – 123.

 

 

 

2018

https://doi.org/10.20290/aubtdb.390999

 

  1. 61.    

Mushtaq S, Wani MF, Saleem SS, Mir J.

 

Tribological and mechanical properties of PM Fe Cu Sn alloy containing graphite as solid lubricant. 201

World Review of Science, Technology and Sustainable Development, 119-134, 14(2)

 

 

2018

https://doi.org/10.1504/WRSTSD.2018.093216

 

  1. 62.    

Khan RA, Anand A, Wani MF.

 

Risk mitigation in new product development – A concurrent engineering perspective.

International Journal of Scientific and Technical Advancements, 4(1), 1-4.

 

 

2018

 

Prof. G. A. Harmain

  1. 63.    

Rishmaya, G. A.  Harmain

 

Wear Performance of Ni-Cr-B-Si Hard-face Coatings Fabricated by Cold Metal Transfer Welding

Part C: Journal of Mechanical Engineering Science

 

 

 

  1. 64.    

Showkat Ahmad Kanth, GA Harmain, Azher Jameel

 

Investigation of fatigue crack growth in engineering components containing different types of material irregularities by XFEM

Mechanics of Advanced Materials and Structures

 

2021

10.1080/15376494.2021.1907003

 

  1. 65.    

Chandra Kant, G. A.  Harmain

 

A Model Based Study of Fatigue Life Prediction for Multifarious Loadings

Key Engineering Materials, 882

 

2021

https://doi.org/10.4028/www.scientific.net/KEM.882.296

 

  1. 66.    

Ishfaq Amin Maekai, G.A.Harmain

 

An assessment of erosive wear of hydro-turbine steel using statistical modeling and optimization

International Journal of Surface Science and Engineering,  15

 

2020

https://doi.org/10.1504/IJSURFSE.2021.114337

 

  1. 67.    

Abhay Kumar, Ghulam Ashraf Ul Harmain

 

Assessment of Notch Effect Based on Finite Element Analysis and Digital Image Correlation Technique

Steel Research International, 92/2

 

2020

10.1002/srin.202000376

 

  1. 68.    

Mohammad ZehabUd Din, G. A. Harmain

 

Assessment of erosive Wear of Pelton Turbine Injector: Nozzle and Spear Combination- A study of Chenani Hydro Power Plant). Engineering Failure Analysis, Elsevier

116

 

2020

10.1016/j.engfailanal.2020.104695

 

  1. 69.    

Aritra Sarkar, Abhishek Kumar, Abhishek Kumar, NageshaAtikukke, Ghulam Ashraf Ul Harmain

 

Influence of creep damage on HCF behavior in alloy 617 M

International Journal of Pressure Vessels and Piping

188

 

2020

doi.org/10.1016/j.ijpvp.2020.104194

 

  1. 70.    

Azher Jameel, Ghulam Ashraf Ul Harmain

 

Large deformation in bi-material components by XIGA and coupled FE-IGA techniques. Mechanics of Advanced Materials and Structures

 

2020

10.1080/15376494.2020.1799120

 

  1. 71.    

Mohammad ZehabUd Din, G. A. Harmain

 

Assessment of erosive Wear of Pelton Turbine Injector: Nozzle and Spear Combination- A study of Chenani Hydro Power Plant). Engineering Failure Analysis, Elsevier

116

 

2020

10.1016/j.engfailanal.2020.104695

 

  1. 72.    

Azher Jameel, G. A. Harmain

 

Effect of material Irregularities on fatigue crack growth by enriched Techniques. International Journal for Computational Methods in Engineering Science and mechanics

 

2020

doi.org/10.1080/15502287.2020.1772902

 

  1. 73.    

Abhishek Kumar, Arira Sarkar, A nagesha, G. A. harmain

 

Generation of HCF creep interaction diagram in alloy 617M at 973 K. International Journal of Fatigue, 136

 

2020

doi.org/10.1016/j.ijfatigue.2020.105612

 

  1. 74.    

Irshad Qadri Ghulam Ashraf Ul Harmain and M. F. Wani

 

Influence of Tool Tip Temperature on crater Wear of Ceramic Inserts during Turning Process of Inconel – 718 at varying hardness. Tribology in Industry, 42

 

2020

10.24874/ti.776.10.19.05

 

  1. 75.    

Ishfaq Amin Maekai, G.A.Harmain

 

Influence of Operating Parameters on Slurry Erosion of Stainless Steel F6NM. Tribology in Industry, 42

 

2020

10.24874/ti.780.10.19.02

 

  1. 76.    

Farooq Ahmad Najar, Ghulam Ashraf Ul Harmain

 

Influence on temperature profile in an oil film in thrust bearings using an embedded cooling circuitry beneath the pad surface: An experimental investigation. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234/05

 

2020

doi.org/10.1177/1350650119886508

 

  1. 77.    

Irshad Qadri Ghulam Ashraf Ul Harmain and M. F. Wani

 

The effect of cutting speed and work piece hardness on turning performance of nickel based super alloy – 718 using ceramic cutting insets. Journal of Engineering Research Express, 2

 

2020

10.1088/2631-8695/ab40f0

 

  1. 78.    

Mohit Goswami, Sunil Goyal, Abhay Kumar, G.A. Harmain, and S.K. Albert

 

Effect of Triaxial State of Stress on Tensile Behavior of Modified 9Cr-1Mo Steel. Journal of Materials Engineering and Performance, 29, 1579 - 1588

 

2020

10.1007/s11665-020-04670-8

 

  1. 79.    

AazimShafi Lone, Showkat Ahmad Kanth, G. A Harmain, Azher Jameel

 

XFEM modeling of frictional contact between elliptical inclusions and solid bodies. Materials Today Proceedings

26, 819 – 824

 

 

 

 

2020

doi.org/10.1016/j.matpr.2019.12.424

 

  1. 80.    

Showkat Ahmad Kanth, AazimShafi Lone, , G. A Harmain, Azher Jameel

 

Modeling of embedded and edge cracks in steel alloys by XFEM. Materials Today Proceedings, 26, 814 - 818

 

2020

doi.org/10.1016/j.matpr.2019.12.423

 

  1. 81.    

Ishfaq Amin Maekai, G.A.Harmain

 

Effect of sediment concentration and particle size on erosion behavior of forged stainless steel. Materials Today Proceedings, 26, 1412 - 1417

 

2020

10.1016/j.matpr.2020.02.293

 

  1. 82.    

Ishfaq Amin Maekai, G.A.Harmain

 

Experimental and numerical investigation on the influence of rotational speed and particle size on wear of hydro turbine steel. Materials Today Proceedings, 26, 419 - 422

 

 

 

 

2020

doi.org/10.1016/j.matpr.2019.12.073

 

  1. 83.    

G. A. Harmain, Anuranjan Kumar, Rajneesh Kumar Gupta, Kanwar Singh Arora

 

Investigation on interface morphology and joint configuration of dissimilar sheet thickness FSSW of marine grade Al alloy. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41

 

2019

10.1007/s40430-019-1882-9

 

  1. 84.    

Irshad Qadri Ghulam Ashraf Ul Harmain and M. F. Wani

 

Assessment of machinability of super alloy inconel 718 using Aluminum oxide and mixed oxide ceramic cutting tools

OP Conference Series Materials Science and Engineering

561

 

2019

10.1088/1757-899X/561/1/012057

 

  1. 85.    

Irshad Qadri Ghulam Ashraf Ul Harmain and M. F. Wani

 

An Experimental Study on Investigation of Machining of nickel based Super Alloy 718. Materials Today Proceedings, 19, 541 - 545

 

2019

https://doi.org/10.1016/j.matpr.2019.07.730Get

 

  1. 86.    

Irshad Qadri Ghulam Ashraf Ul Harmain and M. F. Wani

 

A Study on Effect of Tool Tip Temperature on Wear of Ceramic Cutting Tools, IOP, Journal of Physics: conference series, 1240

 

2019

https://doi.org/10.1088/1742-6596/1240/1/012119

 

  1. 87.    

Showkat Ahmad Kanth, AazimShafi Lone, G. A. Harmain, Azher Jameel

 

Elasto Plastic Crack Growth by XFEM: A Review

Materials Today Proceedings, 18, 3472 - 3481

 

2019

10.1016/j.matpr.2019.07.275

 

  1. 88.    

AazimShafi Lone, Showkat Ahmad Kanth, , G. A. Harmain, Azher Jameel

 

A state of art review on the modeling of Contact type Nonlinearities by Extended Finite Element method

Materials Today Proceedings, 18, 3462 - 3471

 

2019

10.1016/j.matpr.2019.07.274

 

  1. 89.    

Malik Parveez,  Ghulam Ashraf Ul Harmain, Amit Dhiman

 

Influence of height ratio on flow and heat transfer around trapezoidal geometry (a generic sharp-edged body) covering transition to periodic flow. International Journal of Heat and Mass Transfer, 124, 1285 - 1309

 

2018

https://doi.org/10.1016/j.ijheatmasstransfer.2018.03.105

 

  1. 90.    

Saad Parvez, G.A. Harmain

 

Building Taxonomy for developing strategic partnerships with Original Equipment Manufacturers of a firm

Materials Today: Proceedings, 5, 25541-25552

 

2018

doi.org/10.1016/j.matpr.2018.10.361

 

  1. 91.    

Malik Parveez, Amit Dhiman, GA Harmain

 

Aiding buoyancy driven flow and heat transfer features of converging and diverging trapezoidal cylinders

Sadhana, Springer India, 43

 

2018

doi.org/10.1007/S12046-018-0862-6

 

  1. 92.    

Azher Jameel, G. A. Harmain

 

Extended Iso-Geometric Analysis for modeling Three Dimensional Cracks. Mechanics of Advanced Materials and Structures, 26, 915 - 923

 

2018

https://doi.org/10.1080/15376494.2018.1430275

 

  1. 93.    

Aditya Kumar Singh, Azher Jameel, GA Harmain

 

Investigations on crack tip plastic zones by the extended iso-geometric analysis. Materials Today: Proceedings, 5, 19284-19293

 

2018

https://doi.org/10.1016/j.matpr.2018.06.287

 

  1. 94.    

Showkat Ahmad Kanth, GA Harmain, Azher Jameel

 

Modeling of Nonlinear Crack Growth in Steel and Aluminum Alloys by the Element Free Galerkin Method

Materials Today: Proceedings, 5, 18805-18814

 

2018

https://doi.org/10.1016/j.matpr.2018.06.227

 

  1. 95.    

Ghulam Harmain, Azher Jameel

 

A coupled FE-IGA technique for modeling fatigue crack growth in engineering materials. Mechanics of Advanced Materials and Structures, 26

 

2018

https://doi.org/10.1080/15376494.2018.1446571

 

  1. 96.    

Azher Jameel, G. A. Harmain

 

Fatigue crack growth analysis of cracked specimens by the coupled finite element-element free Galerkin method

Mechanics of Advanced Materials and Structures, 26

 

2018

https://doi.org/10.1080/15376494.2018.1432800

 

  1. 97.    

Irshad Qadri Ghulam Ashraf Ul Harmain and M. F. Wani

 

A study on wear analysis of mixed ceramic cutting tool

Journal of Materials Science and mechanical Engineering

5

 

2019

ISSN: 2393-9095

 

Prof. M. M. Wani

  1. 98.   1

M. Marouf Wani

 

Thermodynamic Investigations on the Design of
a Spark Ignition Hydrogen Operated Engine

Energy and Power, 11(1), 20-25

 

2021

10.5923/j.ep.20211101.02

 

  1. 99.   2

M. Marouf Wani

 

CFD Investigations of a Single Cylinder Spark Ignition
Engine Using Digital Valve Mechanism. Energy and Power, 11(1), 26-32

 

2021

10.5923/j.ep.20211101.03

 

  1. 100.        3

Siddavatam Naresh Kumar Reddy and Mohmad Marouf Wani1

 

An investigation on the performance and emission studies on diesel engine by addition of nanoparticles and antioxidants as additives in biodiesel blends

International Review of Applied Sciences and Engineering, Volume 12(2), 111-118

 

2021

10.1556/1848.2020.00157

 

  1. 101.        4

M. Marouf Wani

 

Research Investigations on the Conversion of a High Thermal Efficiency Engine into a Low Emissions engine by Changing, Energy and Power Its Bore to Stroke Ratio, 10(3), 49-56

 

2020

10.5923/j.ep.20201003.01

 

  1. 102.        5

Siddavatam Naresh Kumar Reddy, Mohmad Marouf Wani

 

Engine Performance and Emission Studies by Application of Nanoparticles and
Antioxidants as Additives in Biodiesel Blends

Journal of Composite and Advanced Materials

Volume 30, No. 3-4, 175-180

 

2020

10.18280/rcma.303-408

 

  1. 103.        6

S. Naresh Kumar Reddy and M. Marouf Wani

 

A comprehensive review on effects of nanoparticles-antioxidant additives - biodiesel blends on performance and emissions of diesel engine

Applied science and engineering progress

Volume 13, No. 4, 285-298

 

2020

10.14416/j.asep.2020.06.002

 

  1. 104.        7

R. Hussain Vali, M. Marouf Wani

 

Optimal utilization of ZnO nanoparticles blended diesel-water emulsion by varying compression ratio of a VCR diesel engine. Journal of Environmental Chemical Engineering, Volume 8, Issue 4, 103884

 

2020

10.1016/j.jece.2020.103884

 

105. 

R. Hussain Vali, M. Marouf Wani

 

The effect of mixed nanoadditive-blended diesel–water emulsion on the performance, combustion, and emission characteristics of a DI diesel engine.

Heat Transfer, Volume 49, Issue 6, 3531–3548

 

2020

10.1002/htj.21786

 

106. 

M. Marouf Wani

 

Digital Intake Valve Based CFD Investigations of a Single Cylinder Spark Ignition Engine to Improve Its Performance and Emissions Characteristics. Energy and Power, 10(2), 31-39

 

2020

10.5923/j.ep.20201002.02

 

107. 

M. Marouf Wani

 

Octane Demand as a Criteria for Designing a Spark Ignition Engine Alternatively for Minimum CO Emissions and Maximum Power Generation

Energy and Power, 9(1), 27-37

 

2019

10.5923/j.ep.20190901.03

 

108. 

M. Marouf Wani

 

Thermodynamic Evaluation of Methanol as an
Alternative Fuel to Gasoline in a Single Cylinder
Spark Ignition Engine. Energy and Power, 8(2), 35-45

 

2018

10.5923/j.ep.20180802.01

 

109. 

M. Marouf Wani

 

Computational Investigations on the Performance and
Emissions Characteristics of a Single Cylinder Spark
Ignition Engine Using Petrol and Methanol as Its
Alternative Fuels, Energy and Power, 8(1), 44392

 

2018

10.5923/j.ep.20180801.02

 

Prof. Babar Ahmad

110. 

Diyan Ul Imaan, Fasil Qayoom Mir, Babar Ahmad

 

Synthesis and characterization of a novel poly(vinyl alcohol)-based zinc oxide (PVA-ZnO) composite proton exchange membrane for DMFC, International Journal of Hydrogen Energy, Volume 46, Issue 22, 12230-12241

 

2021

https://doi.org/10.1016/j.ijhydene.2020.05.008

 

111. 

Hussain O, Ahmad B, Saleem S.

 

Tribological performance of biomedical grade UHMWPE/nano-Al2O3/Vitamin-C hybrid composite for cartilage replacements. Materials Letters

291, 129515

 

 

 

2021

https://doi.org/10.1016/j.matlet.2021.129515.

 

112. 

Hussain O, Ahmad B, Saleem S.

 

Analysis of tribological behavior of medical-grade UHMW polyethylene under dry and lubricated conditions with human body fluids using Taguchi and GRA techniques. Journal of Thermoplastic Composite Materials, 1 to 17

 

2020

https://doi.org/10.1177/0892705720941907

 

113. 

Omar Hussain, S S Saleem*, B Ahmad

 

Friction and wear performance evaluation of UHMWPE using Taguchi based grey approach: A study on the influence of load and bio-serum lubrication

Materials Chemistry and Physics, 239, p 121918

 

 

2020

https://doi.org/10.1016/j.matchemphys.2019.121918

 

114. 

Diyan Ul Imaan, Fasil Qayoom Mir, Babar Ahmad

 

Fabrication and characterization of poly (vinyl alcohol) – grapheme nanoplatelets (GNPs) proton exchange membrane for direct methanol fuel cells

Materials Today: Proceedings, Volume 26, Part 2

2901-2906

 

2020

https://doi.org/10.1016/j.matpr.2020.02.599

 

115.6

Umair Ashraf, S Shahid Saleem*, M F Wani, Jebran Khan

 

Effect of load on the tribo-performance of 23-8N valve steel against GGG-60 seat material. Materials Today: Proceedings,  19, 349-353

 

2019

doi.org/10.1016/j.matpr.2019.07.611

 

116. 

Omar Hussain, Babar Ahmad, Shahid Saleem*, M Jebran Khan and M F Wani

 

Effect of counter-face material on the tribological characteristics of UHMW polyethylene under synovial fluid lubrication. Materials Today: Proceedings

19, 260-263

 

2019

doi.org/10.1016/j.matpr.2019.07.205

 

117. 

Omar Hussain, Babar Ahmad, Shahid Saleem 

 

Implant materials for knee and hip joint replacement: A review from the tribological perspective

IOP Conference Series, Materials Science and Engineering, 561 (1), P 12007

 

2019

doi:10.1088/1757-899X/561/1/012007

 

118. 

Diyan ul Imaan, Fasil Qayoom Mir, and Babar Ahmad

 

Preparation and characterization of a novel nano-size titanium oxide-PVA (TiO2-PVA) composite ion exchange membrane. IOP Conf. Series: Journal of Physics: Conf. Series, 1240, 12130

 

2019

doi:10.1088/1742-6596/1240/1/012130

 

119. 

Suhail Ganiny, Majid H Koul and Babar Ahmad

 

Stability Analysis of Dual-rate Haptics Controller Using Two Control Architectures, IOP Conf. Series: Journal of Physics: Conf. Series, 1240, 12145

 

2019

doi:10.1088/1742-6596/1240/1/012145

 

Dr. M. Hanief

120. 

M.Hanief,M.S.Charoo

 

Archard’s Wear Law Revisited To Measure Accurate Wear Coefficient Considering Actual Sliding Velocity

Material today: proceedings

 

2021

doi.org/10.1016/j.matpr.2021.03.475

 

121. 

Zahid Mushtaq M. Hanief

 

Enhancing The Tribological Characteristics Of Jatropha Oil Using

Jurnal Tribology, Page 129-143

 

2021

 

122. 

Zahid Mushtaq M. Hanief

 

Prediction Of Friction And Wear During Ball-On-Flat Sliding Using Multiple Regression And Ann: Modeling And Experimental Validation, Jurnal tribology, 117-128

 

2021

 

123. 

Zahid Mushtaq M Hanief

 

Evaluation Of Tribological Performance Of Jatropha Oil Modified With Molybdenum Disulphide Micro-Particles, ASME Journal of Tribology, Vol. 143  ,Pages / 021401-1 To 13

 

2021

Doi: 10.1115/1.4047752

 

124. 

M.Hanief, M.S.Charoo

 

Modeling And Optimization Of Flank Wear And Surface Roughness Of Monel-400 During Hot Turning Usingartificial Intelligence

Journal Of Metallurgical And Materials Engineering, Vo 26 No1, 57-69

 

2020

Doi.Org/10.30544/473

 

125. 

M.Hanief, M.S.Charoo

 

Modeling And Prediction Of Wear Rate Of Aluminum

Journal Of Metallurgical And Materials Engineering ,Vol 27 No 2

 

2020

//Doi.Org/10.30544/544

 

126. 

M.S.Charoo, M.Hanief,

 

Improving The Tribological Characteristics Of A Lubricating Oil By Nano Sized Additives. Material today:proceedings

Volume 28, Part 2, 2020

 

2020

Doi.Org/10.1016/J.Matpr.2020.01.219

 

Dr. M. S. Charoo

127. 

Wani Khalid Shafi, MS Charoo

 

Avocado oil mixed with an antiwear additive as a potential lubricant–Measurement of antiwear and extreme pressure properties. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235 (11), 2087-2098

 

2020

https://doi.org/10.1177/0954406220951230

 

128. 

Mehak Nisar, MS Charoo

 

Optimization of Fretting Wear Parameters and Effect of High Temperature on Fretting Wear Behavior of Al6061 Alloy and Al6061-SiC Composite, Silicon, 1-13

 

2021

https://doi.org/10.1007/s12633-021-01172-7

 

129. 

Shariq Ahmad Bhat, MS Charoo

 

Formulation and rheology of bio-grease mixed with h-BN nanoparticles. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-13

 

2021

https://doi.org/10.1080/15567036.2021.1927250

 

130. 

Pranav Dev Srivyas, MS Charoo

 

Tribological Characterization of Iron-Based Self-Lubricating Composite under Dry Sliding Conditions

Journal of The Institution of Engineers (India): Series D 1-8

 

2021

https://doi.org/10.1007/s40033-021-00265-2

 

131. 

M Hanief, MS Charoo

 

Archard’s wear law revisited to measure accurate wear coefficient considering actual sliding velocity

Materials Today: Proceedings

 

 

https://doi.org/10.1016/j.matpr.2021.03.475

 

132. 

Pranav Dev Srivyas, MS Charoo

 

Friction and wear reduction by graphene nano platelets for hybrid nano Aluminium matrix composite under dry sliding conditions

Metallurgical and Materials Engineering, 27 ,27-47

 

 

2020

https://doi.org/10.30544/536

 

133. 

Pranav Dev Srivyas, MS Charoo

 

Nano lubrication behaviour of Graphite, h-BN and Graphene Nano Platelets for reducing friction and wear. Materials Today: Proceedings, 44, 7-11

 

 

2020

https://doi.org/10.1016/j.matpr.2020.04.785

 

134. 

Pranav Dev Srivyas, MS Charoo

 

Tribological behaviour of nano additive based PAO lubricant for eutectic Al-Si alloy-chromium plated chrome steel tribopair. Materials Today: Proceedings

44, 1-6

 

2020

https://doi.org/10.1016/j.matpr.2020.04.784

 

135. 

Omar Afzal, Wani Khalid Shafi, MS Charoo

 

Effect of h-BN nanoparticles on the tribological and rheological properties of API-Group I Oils

Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-17

 

2020

https://doi.org/10.1080/15567036.2020.1864516

 

136. 

Wani Khalid Shafi, MS Charoo

 

Antiwear and extreme pressure properties of hazelnut oil blended with ZDDP. Industrial Lubrication and Tribology, 73 (2), 297-307

 

2020

https://doi.org/10.1108/ILT-06-2020-0217

 

137. 

Pranav Dev Srivyas, MS Charoo

 

Tribological behavior of aluminum silicon eutectic alloy based composites under dry and wet sliding for variable load and sliding distance, SN Applied Sciences

2 (10), 1-21

 

2020

https://doi.org/10.1007/s42452-020-03433-3

 

138. 

WK Shafi, M S Charoo

 

Effect of Temperature, Concentration and Aggregation on the Rheological Behavior of ZrO2 – Avocado Oil Nanolubricant. Tribology in Industry

42 (3), 407-418

 

 

2020

DOI: 10.24874/ti.864.03.20.06

 

139. 

Pranav Dev Srivyas, M. S. Charoo

 

Friction and wear reduction properties of GNP nano-particles as nano-additive for Al-Si + Al2O3 composite/Chromium plated steel tribopair

Jurnal Tribologi, 25, 83-101

 

 

 

140. 

WK Shafi, M S Charoo

 

An overall review on the tribological, thermal and rheological properties of nanolubricants

Tribology - Materials, Surfaces & Interfaces, 15, 1-35

 

2020

https://doi.org/10.1080/17515831.2020.1785233

 

141. 

Pranav Dev Srivyas, M. S. Charoo

 

Friction and Wear Characterization of Spark Plasma Sintered Hybrid Aluminum Composite Under Different Sliding Conditions. Journal of Tribology (ASME)

142, 121701-121718

 

2020

DOI: 10.1115/1.4047456

 

142. 

PD Srivyas, M S Charoo

 

Nano lubrication behaviour of Graphite, h-BN and Graphene Nano Platelets for reducing friction and wear. Materials Today: Proceedings, 44, 7-11

 

2020

https://doi.org/10.1016/j.matpr.2020.04.785

 

143. 

PD Srivyas, M S Charoo

 

Tribological behaviour of nano additive based PAO lubricant for eutectic Al-Si alloy-chromium plated chrome steel tribopair. Materials Today: Proceedings

44, 1-6

 

 

2020

https://doi.org/10.1016/j.matpr.2020.04.784

 

144. 

M Hanief, M S Charoo

 

Modeling and optimization of flank wear and surface roughness of Monel-400 during hot turning using artificial intelligence techniques. Metallurgical and Materials Engineering, 26 No 1, 57-69

 

2020

https://doi.org/10.30544/473

 

145. 

Pranav Dev Srivyas, M. S. Charoo

 

Effect of Load on the Tribological Properties of Eutectic Al-Si Reinforced n-Al2O3 under Dry Sliding Conditions. Advances in Tribology, 2020, 1-18

 

2020

https://doi.org/10.1155/2020/3761745

 

146. 

M. S. Charoo, M. Hanief

 

Improving the tribological characteristics of a lubricating oil by nano sized additives. Materials Today: Proceedings, 28, 1205-1209

 

2020

https://doi.org/10.1016/j.matpr.2020.01.219

 

147. 

WK Shafi, M S Charoo

 

Rheological properties of hazelnut oil mixed with zirconium-dioxide nanoparticles. Materials Today: Proceedings, 26 Part 2, 745-749

 

2020

https://doi.org/10.1016/j.matpr.2020.01.019

 

148. 

PD Srivyas, M S Charoo

 

Tribological characterization of hybrid aluminum composite under boundary lubricating sliding conditions. Materials Today: Proceedings

26, 492-500

 

 

2020

https://doi.org/10.1016/j.matpr.2019.12.114

 

149. 

PD Srivyas, M S Charoo

 

Effect of load on the friction and wear properties of aluminum hybrid composite/chromium plated chrome steel tribopair under boundary lubrication conditions.

Materials Today: Proceedings, 26 Part 2, 287-295

 

 

https://doi.org/10.1016/j.matpr.2019.11.268

 

150. 

PD Srivyas, M S Charoo

 

Effect of Load, Sintering Temperature and Reinforcement Concentration on Al-Si/γ-Al2O3/GNP Self-Lubricating Hybrid Composite. Tribology in Industry, 41 (4), 498-515

 

 

DOI: 10.24874/ti.2019.41.04.04

 

151. 

PD Srivyas, M S Charoo

 

Effect of Sintering Temperature and Reinforcement Concentration on the Tribological Behaviors of Hybrid Aluminum Matrix Nano Composite. Tribology in Industry, 41 (4), 573-591

 

 

DOI: 10.24874/ti.2019.41.04.10

 

152. 

PD Srivyas, M S Charoo

 

Effect of load on the tribological behavior of self-lubricating hybrid aluminum composite under dry sliding conditions. Materials Research Express

6 (12), 125702

 

 

2019

https://doi.org/10.1088/2053-1591/ab559c

 

153. 

WK Shafi, M S Charoo

 

Experimental study on rheological properties of vegetable oils mixed with titanium dioxide nanoparticles. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41, 431

 

 

2019

https://doi.org/10.1007/s40430-019-1905-6

 

154. 

PD Srivyas, M S Charoo

 

Fabrication and micro-hardness properties of nano-Al2O3 reinforced aluminium metal matrix composite by field-assisted sintering technique/spark plasma sintering processing route. International Journal of Rapid Manufacturing, 8(3), 178-209

 

 

2019

DOI: 10.1504/IJRAPIDM.2019.100499

 

155. 

PD Srivyas, M S Charoo

 

Effect of Lubricants Additive: Use and Benefit

Materials Today: Proceedings, 18, 4773-4781

 

2019

https://doi.org/10.1016/j.matpr.2019.07.465

 

156. 

WK Shafi, M S Charoo

 

Rheological Properties Of Sesame Oil Mixed With H-Bn Nanoparticles As Industrial Lubricant

Materials Today: Proceedings, 18, 4963-4967

 

2019

https://doi.org/10.1016/j.matpr.2019.07.488

 

157. 

Pranav Dev Srivyas, M S Charoo

 

Application of Hybrid Aluminum Matrix Composite in Automotive Industry. Materials Today: Proceedings

18, 3189-3200

 

 

https://doi.org/10.1016/j.matpr.2019.07.195

 

158. 

SA Bhat, M S Charoo

 

Effect of Additives on the Tribological Properties of Various Greases-A Review. Materials Today: Proceedings ,18, 4416-4420

 

2019

https://doi.org/10.1016/j.matpr.2019.07.410

 

159. 

M.S. Charoo, P.D. Srivyas

 

A Review on Tribological Characterization of Lubricants with Nano Additives for Automotive Applications. Tribology in Industry, 40(4), 594-623

 

 

DOI: 10.24874/ti.2018.40.04.08

 

160. 

M.S. Charoo, P.D. Srivyas

 

Aluminum metal matrix composites a review of reinforcement; mechanical and tribological behavior.

International Journal of Engineering & Technology

7(2.4), 117-122

 

 

2018

DOI: 10.14419/ijet.v7i2.4.13020

 

161. 

M.S. Charoo, P.D. Srivyas

 

Role of Fabrication Route on the Mechanical and Tribological Behavior of Aluminum Metal Matrix Composites – A Review. Materials Today: Proceedings

5(9), 20054-20069

 

2018

DOI: 10.1016/j.matpr.2018.06.372

 

162. 

M.S. Charoo, P.D. Srivyas

 

Role Of Reinforcements On The Mechanical And Tribological Behavior Of Aluminum Metal Matrix Composites – A Review. Materials Today: Proceedings

5(9), 20041-20053

 

2018

DOI: 10.1016/j.matpr.2018.06.371

 

163. 

M.S. Charoo, Wani Khalid Shafi

 

NanoLubrication Systems: An Overview

Materials Today: Proceedings, 5(9), 20621-20630

 

 

2018

DOI: 10.1016/j.matpr.2018.06.443

 

Dr. Saad Parvez

164. 

SAAD PARVEZ

 

Application of Fuzzy VIKOR and cluster analysis for performance evaluation of OEMs. Materials Today, Elsevire, 27(2020) 1411-1416

 

2020

https://doi.org/10.1016/j.matpr.2020.02.785

 

165. 

H GadaD MudgalS ParvezB Ahmad 

 

Investigation of high temperature corrosion resistance of Ni25Cr coated and bare 347H SS in actual husk fired boiler atmosphere. Engineering Failure Analysis, 2020 - Elsevier

 

2018

https://doi.org/10.1016/j.engfailanal.2019.104256

 

Dr. Sheikh Shahid Saleem

166. 

Masrat Bashir, Adnan Qayoum and Shahid Saleem

 

Experimental Investigation of Thermal and Tribological Characteristics of Brake Pad Developed from Eco-Friendly Materials

J Bio Tribo Corros 7, 66 (2021), 7(66)

 

2021

https://doi.org/10.1007/s40735-021-00502-x

 

167. 

Hussain O, Ahmad B, Saleem S.

 

Tribological performance of biomedical grade UHMWPE/nano-Al2O3/Vitamin-C hybrid composite for cartilage replacements. Materials Letters

291,129515

 

2021

https://doi.org/10.1016/j.matlet.2021.129515.

 

168. 

Sheikh Shahid Saleem, M F Wani,

 

Effect of load on the behaviour of tribofilms formed at the interface of austenitic steel and ductile iron - A Raman Spectroscopic study

Advances in Materials and Processing Technologies, 1 to 15

 

2020

https://doi.org/10.1080/2374068X.2020.1860591

 

169. 

Sheikh Shahid Saleem, M F Wani, M Jebran Khan

 

Tribological investigations on tribofilm formation and retention under dry sliding conditions with increasing loads. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 235(1), 59-72

 

 

 

https://doi.org/10.1177/1464420720951835

 

170. 

Hussain O, Ahmad B, Saleem S.

 

Analysis of tribological behavior of medical-grade UHMW polyethylene under dry and lubricated conditions with human body fluids using Taguchi and GRA techniques. Journal of Thermoplastic Composite Materials, 1 to 17

 

2020

https://doi.org/10.1177/0892705720941907

 

171. 

K. R. Yellu Kumar, Adnan Qayoum, Shahid Saleem and Faisal Qayoum

 

Review of Effusion Cooling in Combustion Chambers of Gas Turbine Engines

IOP Conf. Series: Materials Science and Engineering, 804, p 012003

 

2020

doi:10.1088/1757-899X/804/1/012003

 

172. 

Omar Hussain, S S Saleem*, B Ahmad

 

Friction and wear performance evaluation of UHMWPE using Taguchi based grey approach: A study on the influence of load and bio-serum lubrication. Materials Chemistry and Physics, 239, p 121918

 

 

2020

https://doi.org/10.1016/j.matchemphys.2019.121918

 

173. 

Shahid Manzoor Wani, M F Wani, Shahid Saleem

 

Effect of load on the friction and wear behaviour of Silicon Nitride and Silicon Nitride titanium carbide ceramic composite. Materials Today: Proceedings, 19, 474 -477

 

2019

doi.org/10.1016/j.matpr.2019.07.611

 

174. 

Umair Ashraf, S Shahid Saleem*, M F Wani, Jebran Khan

 

Effect of load on the tribo-performance of 23-8N valve steel against GGG-60 seat material, Materials Today: Proceedings

19, 349-353

 

2019

doi.org/10.1016/j.matpr.2019.07.611

 

175. 

Omar Hussain, Babar Ahmad, Shahid Saleem*, M Jebran Khan and M F Wani

 

Effect of counter-face material on the tribological characteristics of UHMW polyethylene under synovial fluid lubrication. Materials Today: Proceedings, 19, 260-263

 

2019

doi.org/10.1016/j.matpr.2019.07.205

 

176. 

Masrat Bashir, Adnan Qayoum and Shahid Saleem

 

Influence of lignocellulosic banana fiber on the thermal stability of brake pad material Mater. Res. Express, 6 (11), P 115551

 

2019

https://doi.org/10.1088/2053-1591/ab37bd

 

177. 

Omar Hussain, Babar Ahmad, Shahid Saleem 

 

Implant materials for knee and hip joint replacement: A review from the tribological perspective, IOP Conference Series, Materials Science and Engineering, 561 (1), P 12007

 

2019

doi:10.1088/1757-899X/561/1/012007

 

178. 

Masrat Bashir, Adnan Qayoum and Shahid Saleem

 

Analysis of frictional heating and thermal expansion in a disc brake using COMSOL, Journal of Physics: Conference Series,

1240 (1), P 012094

 

 

2019

 

doi:10.1088/1742-6596/1240/1/012094

 

179. 

Jebran Khan, Himanshu Gandotra, Shahid Saleem and M F Wani

 

Correlating the effect of material hardness, counterface hardness and load on the friction and wear of virgin and glass filled Polytetrafluoroethylene (PTFE) using Taguchi approach and statistical analysis, Journal of Physics: Conference Series, 1240 (1), P 012106

 

2019

doi:10.1088/1742-6596/1240/1/012106

 

180. 

Saleem, S S, Wani, M F

 

Effect of load on tribofilms at the contact interface under dry sliding conditions at 500 C. Material wissenschaft und Werkstofftechnik (Materials Science and Engineering Te, 49 (2), chnology), 169-184

 

2018

doi:10.1002/mawe.201700108

 

181. 

Shuhaib Mushtaq, M. F. Wani, Sheikh Shahid Saleem, Muhammad Junaid Mir

 

Tribological and mechanical properties of PM Fe-Cu-Sn alloy containing graphite as a solid lubricant. World Review of Science, Technology and Sustainable Development, 14 (2/3), 119-134

 

2018

doi:10.1504/wrstsd.2018.093216

 

Dr. Mohammad Mursaleen

182. 

Mohammad Nishat Akhtar 1 , Muneer Khan 2 , Sher Afghan Khan 3 , Asif Afzal 4,* , Ram Subbiah 5 , Sheikh Nazir Ahmad 2 , Murtuja Husain 6 , Mohammad Mursaleen Butt 2 , Abdul Rahim Othman 7,* and Elmi Abu Bakar

 

Determination of Non-Recrystallization Temperature for Niobium Microalloyed Steel. Materials MDPI

14(10)

 

2021

https://doi.org/10.3390/ma14102639

 

183. 

Rahul Kumar, Veera Sesha Kumar, M. Mursaleen Butt, Nazir Ahmed Seikh, Sher Afghan Khan, Asif Afzal

 

Thermo-mechanical Analysis and Estimation of Turbine Blade Tip Clearance of a Small Gas Turbine Engine under Transient Operating Condition

Applied Thermal Engineering, 179

 

2020

https://doi.org/10.1016/j.applthermaleng.2020.115700

 

184. 

MM Butt, KA Najar, TH Dar

 

Experimental evaluation of multilayered CVD- and PVD-coated carbide turning inserts in severe machining of AISI-4340 steel alloy

Jurnal Tribologi, 29, 117-143

 

 

2021

 

185. 

MMButt, Sheikh Nazir Ahmad

 

Modeling and analysis of debonding in a smart beam in sensing mode using variational formulation. Journal of King Saud University-Science, 32(1), 29-43

 

 

 

https://doi.org/10.1016/j.jksus.2017.09.013

 

186. 

Kaleem Ahmad Najar, NA Sheikh, M Mursaleen Butt, Shuhaib Mushtaq, MA Shah

 

Engineered synthetic diamond film as a protective layer for tribological and machining applications: a review. Journal of Bio-and Tribo-Corrosion-Springer

5(3)

 

2019

https://doi.org/10.1007/s40735-019-0252-6

 

187. 

S Mushtaq, MF Wani, M Nadeem, KA Najar, M Mursaleen

 

A study on friction and wear characteristics of Fe–Cu–Sn alloy with MoS2 as solid lubricant under dry conditions

:Sadhana, 44(12), 1-7

 

2019

https://doi.org/10.1007/s12046-019-1208-8

 

188. 

Sajad Hussain Din, MA Shah, NA Sheikh, M Mursaleen Butt

 

 

Transactions of the Indian Institute of Metals volume

72(1), 1-9

 

2019

https://doi.org/10.1007/s12666-018-1454-1

 

189. 

MA Reshi, M Mursaleen

 

Study of the failure of condenser tube in water cooled centrifugal chiller, journal of Physics, 1240(1), 121-152

 

2019

doi:10.1088/1742-6596/1240/1/012152

 

190. 

Sajad Hussain Din, NA Sheikh, M Mursaleen Butt

 

Mechanical and Tribological Behavior of Microcrystalline CVD Diamond Coatings

journal of bio & tribo corrioson, 4(2), 1-10

 

2018

https://doi.org/10.1007/s40735-018-0144-1

 

191. 

kaleem Ahmad Najar, N.A. Sheikh, Mohammad Mursaleen Butt, M.A. Shah

 

Enhancing the wear resistance of WC–Co cutting inserts using synthetic diamond coatings

Industrial Lubrication and Tribology    Emerald Publishing Limited, 70(&) ,1224-1233

 

2018

https://doi.org/10.1108/ILT-04-2017-0089

 

Dr. Mukund Dutt Sharma

192. 

Sanjay Kumar, Rakesh Sehgal, M.F.Wani, Mukund Dutt  Sharma

 

Stabilization and Tribological Properties of Magnetorheological (MR) Fluids: A Review

Journal of Magnetism and Magnetic Materials, Elseiver, Available online 16 July 2021, 168295

 

2021

https://doi.org/10.1016/j.jmmm.2021.168295

 

193. 

Yashpal, C.S. Jawalkar, Suman Kant, Narender Panwar, Mukund Dutt Sharma, Harveer Singh Pali

 

Effect of Particle Size Variation of Bagasse Ash on Mechanical Properties of Aluminium Hybrid Metal Matrix Composites, Materials Today: Proceedings, Elsevier

21, 4

 

 

2020

https://doi.org/10.1016/j.matpr.2020.01.319

 

194. 

Narender Panwar, Amit Chauhan, Harveer Singh Pali, Mukund Dutt Sharma

 

Fabrication of aluminum 6061 red-mud composite using stir casting and Micro structure observation

Materials Today: Proceedings, Elsevier, 21, 4

 

2020

https://doi.org/10.1016/j.matpr.2020.01.318

 

Dr. Noor Zaman Khan

195. 

Annayath Maqbool, Noor Zaman Khan, Arshad Noor Siddiquee

 

Towards Mg based light materials of future: Properties, applications, problems and their mitigation. Journal of Manufacturing Science and Engineering

 

2021

 https://doi.org/10.1115/1.4051678

 

196. 

Mohd Rafiq Parray, Noor Zaman Khan, Annayath Maqbool

 

Fabrication and characterization of magnesium based surface composites with hybrid reinforcements by friction stir processing: A review. Materials Today: Proceedings

 

2021

https://doi.org/10.1016/j.matpr.2021.03.694

 

197. 

Noor Zaman Khan, Annayath Maqbool, Tariq Ahmad, Arshad Noor Siddiquee, Zahid A Khan

 

Fracture behaviour of friction stir welded dissimilar aluminium alloys. Materials Today: Proceedings

 

2021

https://doi.org/10.1016/j.matpr.2021.04.158

 

198. 

Sheikh Shahid Ul Islam, Noor Zaman Khan, Mohammad Mohsin Khan

 

Effect of reinforcement on magnesium-based composites fabricated through stir casting: A review

Materials Today: Proceedings

 

2021

https://doi.org/10.1016/j.matpr.2021.03.710

 

199. 

Fayaz Ahmad Mir, Noor Zaman Khan, Saad Parvez

 

Recent advances and development in joining ceramics to metals. Materials Today: Proceedings

 

2021

https://doi.org/10.1016/j.matpr.2021.04.047

 

200. 

Sameera Mufazzal, Sarfaraz Masood, Noor Zaman Khan, SM Muzakkir, Zahid A Khan

 

Towards minimization of overall inconsistency involved in criteria weights for improved decision making. Applied Soft Computing

100

 

2021

https://doi.org/10.1016/j.asoc.2020.106936

 

201. 

Dhruv Bajaj, Arshad Noor Siddiquee, Noor Zaman Khan, AK Mukhopadhyay, Sohail MA Khan Mohammed, Daolun Chen, Namrata Gangil

 

Flow, process forces and strains during Friction Stir Welding: A comprehensive First principle approach

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

235(5), 912-924

 

2021

https://doi.org/10.1177/0954405420970087

 

202. 

Namrata Gangil, Sachin Maheshwari, Arshad Noor Siddiquee, Noor Zaman Khan, Xizhang Chen, Sergey Konovalov

 

Microstructural characterization and tribological behavior of surface composites fabricated on AA7050-T7451 alloy via friction stir processing

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235(2), 351-359

 

2021

https://doi.org/10.1177/1350650120950867

 

203. 

Annayath Maqbool, Noor Zaman Khan

 

Analyzing barriers for implementation of public health and social measures to prevent the transmission of COVID-19 disease using DEMATEL method

Diabetes & Metabolic Syndrome: Clinical Research & Reviews, 14(5), 887-892

 

2020

https://doi.org/10.1016/j.dsx.2020.06.024

 

204. 

Arshad Noor Siddiquee, Sunil Pandey, Mustufa Haider Abidi, Abdulrahman Al-Ahmari, Noor Zaman Khan, Namrata Gangil

 

Microstructural characterization and in-process traverse force during friction stir welding of austenitic stainless steel. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234(5), 1031-1043

 

2020

https://doi.org/10.1177/0954406219888238

 

205. 

Mohammad Owais Qidwai, Mohammad Muzaffarul Hasan, Noor Zaman Khan, Urfi Khan

 

Optimization of heat transfer effects in radial fin microchannel heat sink, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects

 

 

https://doi.org/10.1080/15567036.2019.1704947

 

206. 

Rajesh Attri, Ashishpal, Noor Zaman Khan, Arshad Noor Siddiquee, Zahid A Khan

 

ISM-MICMAC approach for evaluating the critical success factors of 5S implementation in manufacturing organisations. International Journal of Business Excellence, 20(4), 521-548

 

2020

https://doi.org/10.1504/IJBEX.2020.106437

 

207. 

Mohammad Owais Qidwai, Mohammad Muzaffarul Hasan, Noor Zaman Khan, Mohd Ariz

 

Performance evaluation of simple radial fin design for single phase liquid flow in microchannel heat sink

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 235(1), 80-92

 

2020

https://doi.org/10.1177/0954408920944269

 

208. 

Noor Zaman Khan, Dhruv Bajaj, Arshad Noor Siddiquee, Zahid A Khan, Mustufa Haider Abidi, Usama Umer, Hisham Alkhalefah

 

Investigation on effect of strain rate and heat generation on traverse force in FSW of dissimilar aerospace grade aluminium alloys

Materials, 12(10), 1641

 

2019

https://doi.org/10.3390/ma12101641

 

209. 

Pankul Goel, Noor Zaman Khan, Zahid A Khan, Abdulrahman Ahmari, Namrata Gangil, Mustufa Haider Abidi, Arshad Noor Siddiquee

 

Investigation on material mixing during FSW of AA7475 to AISI304. Materials and Manufacturing Processes, 34(2), 192-200

 

2019

https://doi.org/10.1080/10426914.2018.1544717

 

210. 

Noor Zaman Khan, Talhah Shamshad Ali Ansari, Arshad Noor Siddiquee, Zahid A Khan

 

Selection of E-learning websites using a novel Proximity Indexed Value (PIV) MCDM method

Journal of Computers in Education, 6(2), 241-256

 

2019

https://doi.org/10.1007/s40692-019-00135-7

 

211. 

Noor Zaman Khan, Suha K Shihab, Rajesh Attri, Arshad Noor Siddiquee, Zahid A Khan

 

Prioritization of lower back pain risk factors among industrial workers using the best–worst method

International Journal of Occupational Safety and Ergonomics, 27(2), 544-551

 

2019

https://doi.org/10.1080/10803548.2019.1600303

 

Dr. Mohammad Mohsin Khan

212. 

Mohammad Mohsin Khan, Abhijit Dey

 

Selection of optimal processing condition during abrasive Wear of in-situ ZA-37/TiCp composites using MCDM technique, Ceramics International, 47(14) ,20090-20107

 

 

https://doi.org/10.1016/j.ceramint.2021.04.016

 

213. 

Mohammad Mohsin Khan, Abhijit Dey & Mohammad Irfan Hajam

 

Experimental Investigation and Optimization of Dry Sliding Wear Test Parameters of Aluminum Based Composites, Silicon

 

 

https://doi.org/10.1007/s12633-021-01158-5

 

214. 

Abhijit Dey, Mohammad Mohsin Khan

 

MCD Approach for Assessing the Optimal Operating Condition during Sliding Wear Characteristics of LM25/SiC AMCs Processed by an Improved Stir Casting Technique, Silicon

 

 

https://doi.org/10.1007/s12633-021-01123-2

 

215. 

Mohammad Mohsin Khan, Mohammad Irfan Hajam, and Zahoor Ahmad Mir

 

Optimizing the effect of solid lubricants on the sliding Wear behavior of SiC p reinforced cast aluminum alloy

Journal of Bio-and Tribo-Corrosion, 7(1)

 

 

https://doi.org/10.1007/s40735-020-00460-w

 

216. 

Ambreen Nisar, Shipra Bajpai, Mohammad Mohsin Khan, Kantesh Balani

 

Wear damage tolerance and high temperature oxidation behavior of HfB2:ZrB2–SiC composites

Ceramics International, 46(13), 21689-21698

 

2020

https://doi.org/10.1016/j.ceramint.2020.05.276

 

217. 

Mohammad Mohsin Khan, Gajendra Dixit

 

Evaluation of Microstructure, Mechanical, Thermal and Erosive Wear Behavior of Aluminum-Based Composites, Silicon, 12(1), 59-70

 

2020

https://doi.org/10.1007/s12633-019-00099-4

 

218. 

Ambreen Nisar, Mohammad Mohsin Khan, Shipra Bajpai, Kantesh Balani

 

Processing, microstructure and mechanical properties of HfB2-ZrB2-SiC composites: Effect of B4C and carbon nanotube reinforcements, International Journal of Refractory Metals and Hard Materials, 81, 111-118

 

 

https://doi.org/10.1016/j.ijrmhm.2019.02.014

 

219. 

Ambreen Nisar, Mohammad Mohsin Khan, Kantesh Balani

 

Enhanced thermo-mechanical damage tolerance of functionally graded ZrB2-20SiC ceramic reinforced with carbon nanotubes. Ceramics International

45(5), 6198-6208

 

 

https://doi.org/10.1016/j.ceramint.2018.12.097

 

220. 

Mohammad Mohsin Khan, Gajendra Dixit

 

Abrasive Wear Characteristics of Silicon Carbide Particle Reinforced Zinc Based Composite

Silicon, 10(4), 1315-1327

 

 

https://doi.org/10.1007/s12633-017-9607-0

 

Dr. Harveer Singh Pali

221. 

Harveer Singh Pali*, A. Sharma, Y. Singh, N. Kumar

 

Biodiesel yield and properties optimization from Kusum oil by RSM, Fuel, 291

 

2021

https://doi.org/10.1016/j.fuel.2021.120218

 

222. 

Harveer Singh Pali*, A. Sharma, Y. Singh, N. Kumar

 

Sal biodiesel production using Indian abundant forest feedstock, Fuel, 273

 

2020

https://doi.org/10.1016/j.fuel.2020.117781

 

223. 

Harveer Singh Pali*, A. Sharma, Y. Singh, N. Kumar

 

Sustainable Route for S. Oleosa Biodiesel Production using Response Surface Methodology, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects

 

 

https://doi.org/10.1080/15567036.2020.1837298

 

224. 

H S Pali

 

Experimental Investigations of Storage Stability of Kusum Biodiesel, Journal of Biofuels, 10, 87-96

 

 

10.5958/0976-4763.2019.00012.6

 

225. 

M. Raza, P. Kumar, Harveer Singh Pali

 

Production of Biodiesel using Waste Frying Oil for Diesel Engine, Journal of Biofuels, 9(2), 113-123

 

 

10.5958/0976-4763.2018.00013.2

 

Dr. Abhijit Dey

226. 

Anshuman Das, Saroj Kumar Patel, Manoranjan Arakha, Abhijit Dey, Bibhuti Bhushan Biswal

 

Processing of hardened steel by MQL technique using nano cutting fluids. Materials and Manufacturing Processes, 36(3), 316-328

 

2021

 

227. 

Abhijit Dey, Krishna Murari Pandey, Ram Naresh Rai, Akhtar Khan, Anshuman Das

 

Application Potential Of Response Surface Method On Electro Discharge Machining of AA6061–Cenosphere AMCS Prepared By Compocasting Method, Surface Review and Letters, 2150056

 

2021

 

228. 

Mohammad Mohsin Khan, Abhijit Dey

 

Selection of optimal processing condition during abrasive Wear of in-situ ZA-37/TiCp composites using MCDM technique. Ceramics International, 47(14), 20090-20107

 

 

 

229. 

Mohammad Mohsin Khan, Abhijit Dey, Mohammad Irfan Hajam

 

Experimental Investigation and Optimization of Dry Sliding Wear Test Parameters of Aluminum Based Composites. Silicon, 33

 

 

 

230. 

Abhijit Dey, Mohammad Mohsin Khan

 

MCD Approach for Assessing the Optimal Operating Condition during Sliding Wear Characteristics of LM25/SiC AMCs Processed by an Improved Stir Casting Technique. Silicon, 28

 

2021

 

231. 

Pawan Kumar, Manvendra Tiwari, Mamookho Elizabeth Makhatha, Abhijit Dey, Bipin Bihari Verma

 

Effect of Rate of Loading on Jute Fibre-Reinforced Polymer Composite. Transactions of the Indian Institute of Metals

 

2020

 

232. 

Abhijit Dey Amit Kumar Dey

 

Selection of optimal processing condition during removal of Reactive Red 195 by NaOH treated jute fibre using adsorption. Groundwater for Sustainable Development, 12, 100522

 

2020

 

233. 

AK Dey, U Kumar, A Dey

 

Use of response surface methodology for the optimization of process parameters for the removal of Congo Red by NaOH treated jute fibre. Desalination and Water Treatment, 115, 300-314

 

2018

 

234. 

Abhijit Dey, Krishna Murari Pandey

 

Wire electrical discharge machining characteristics of AA6061/cenosphere as-cast aluminum matrix composites. Materials and Manufacturing Processes

33(12), 1346-1353

2018

 

235. 

Abhijit Dey, Krishna Murari Pandey

 

Wear behaviour of Mg alloys and their composites–a review. International journal of materials research

109(11), 1050-1070

 

2018

 

236. 

A Dey, KM Pandey

 

Selection of optimal processing condition during WEDM of compocasted AA6061/cenosphere AMCs based on grey-based hybrid approach, Materials and Manufacturing Processes, 33(14), 1549-1558

 

 

2018

 

237. 

Mujibur Rahman, Abhijit Dey, Krishna Murari Pandey

 

Machinability of cenosphere particulate–reinforced AA6061 aluminium alloy prepared by compocasting

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(14), 2499-2509

 

2018

 

Dr. Manoj Kumar

238. 

Neeraj Mehla, Manoj Kumar, Avadhseh Yadav

 

Annual performance evaluation of evacuated tube solar air collector with phase change material (PCM)

Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation (ASME), 142

31007, (1-10)

 

2020

 https://doi.org/10.1115/1.4045823

 

239. 

Neeraj Mehla, Krishan Kumar & Manoj Kumar

 

Thermal analysis of solar updraft tower by using different absorbers with convergent chimney. Environment, Development and Sustainability (Springer), 21, (1251-1269)

 

2019

DOI. Org/10.1007/s10668-018-0087-1

 

©2020 WebDeveloper NIT Srinagar- All Rights Reserved  |  Last modified: 30-Jul-2021